Sub Contract CNC Work

The Tek-Tanks AXYZ  4000 series CNC machine now has spare capacity due to our in-house increased workflow. This spare capacity has enabled us to offer a sub contract machining service in a wide variety of materials.

The machines capacity is as follows:

3000mm in X axis and  1500mm in Y axis  with 150mm capacity in the Z axis
12 horsepower Spindle
21 gang tool changer. A current list of loaded tools is available on request but other tools can be provided if required at cost.
Vacuum table with MDF sacrificial sheet split into 6 zones.
Oil Mister for use with aluminium.

Video shows machine cutting a Tek-Tanks sign. Video is speeded up! …….. actual time was just over 10 minutes.

The AXYZ machine is capable of machining the following materials in sheet form:

– Plywood
– MDF
– Chipboard
– Hardboard
– Melamine and veneered faced MDF
– Polyethylene
– Polypropylene
– PVC
– Acetal
– Acrylic
– Corian
– Aluminium
– Carbon Fibre
– Various soft and hardwoods

We have successfully machined polyethylene 40mm thick without any problems.

Ideally we need your work saved in one of the following formats:

.ai
.eps
.dxf   (preferred)
.dwg  (preferred)
.pic
.wmf

Once we have your drawings we can optimise them in our nesting software and tell you how many sheets would be required. We are happy to accept free issue material or supply if required.

If you think you have a requirement for the CNC then it is probably best to just give us a ring on 01420 525477  so we can talk through your requirements and come up with the best solution that meets your needs. Best to ask for either Richard or Martin as they drive it!

 
Classic Car Dashboard