NEW - Gobius Digital Senders
All Gobius products measure from the outside, avoiding the need of to take the tank apart and drill unnecessary holes.
-Measure the contents of your metal tank from the outside
-No need to drill any holes in the tank
-Suitable for Water, Waste and Diesel
-Can be used on Plastic tanks as well
Gobius for holding tanks in stainless steel, steel, plastic and aluminum
Using a totally new protected technical solution we have developed level indicators for holding tanks. Gobius has been developed to meet the demand from those boat owners who want more information, those who not only want to know when the tank is full.
Gobius measures from the outside!
|
Very quick to install and easy to use |
|
Coloured lamps show the current fluid level |
|
You avoid the struggle with taking the tank apart |
|
No extra drilling of holes |
|
No need for extra servicing |
|
Extremely low electricity consumption, less than 40 mA |
With Gobius you will gain
|
Knowledge of when the tank is empty so that you do not have to empty it |
|
Knowledge of when the tank is full and needs to be emptied |
|
Increased comfort and safety on board |
|
Everyone knows whether to use the toilet or not |
|
You can use the toilet when in the harbour |
The Gobius technology (patent pending)
The sensors that are placed onto the tank wall consist of a shaker and an accelerator. When the shaker creates a vibration in the tankwall, the accelerator measures the size of the vibration and passes the data on to the control unit. The control unit then starts
to calculate in order to give an exact estimate of whether the fluid
level has passed the sensor or not.
Gobius is easy to install
On the sensors there are strips of tape that are provided to attach the sensors directly onto the surface of your tank. The panel may, for example, be placed in the washroom. The control unit is connected to the boat battery. All necessary cables and plugs needed to connect the sensors and panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds, all you need to do is to press a button while the tank is empty.
Gobius measures perfect even if there are covers (like uric salts) on the inside of the tank wall.
Extremely low electricity consumption, less than 40 mA
Gobius is constructed to minimise electricity consumption and is extremely efficient. Gobius sends power to its sensors in impulses instead of a continuous supply, thus saving your craft’s battery, 12 Volts.
Part No 970091, Gobius for holding tanks in stainless steel, steel & aluminum
Part No 970053, Gobius for holding tanks in plastic
Download product information for Gobius 4 for Metal Holding Tanks
Download product information for Gobius 4 for Plastic Holding Tanks
Gobius for water or diesel tanks in stainless steel, steel, plastic and aluminum
All Gobius products measure from the outside, avoiding the need of to take the tank apart and drill unnecessary holes.
Gobius measures from the outside
|
Very quick to install and easy to use |
|
Coloured lamps show the current fluid level |
|
You avoid the struggle with taking the tank apart |
|
No extra drilling of holes |
|
No need for extra servicing |
|
Extremely low electricity consumption, less than 40 mA |
Gobius is easy to install
On the sensors there are strips of tape that are provided to attach the sensors directly onto the surface of your tank. The panel may be placed in the kitchenenette or on the control panel. All necessary cables and plugs needed to connect the sensors and panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds, all you need to do is to press a button while the tank is full.
Extremely low electricity consumption, less than 40 mA
Gobius is constructed to minimise electricity consumption and is extremely efficient. Gobius sends power to its sensors in impulses instead of a continuous supply, thus saving your craft’s battery.
Part No 970381 Gobius for tanks in stainless steel, steel & aluminum
Part No 970193 Gobius for tanks in plastic
Download product information for Gobius 4 for Metal Water & Fuel Tanks
Download product information for Gobius 4 for Plastic Water & Fuel Tanks
8 Tank Digital Measuring System
 |
Main Features:
Monitors up to 8 different tanks.
Multi-Tank display shows fluid levels for up to 8 tanks as 12 position vertical bar graphs (see upper graphic at left).
Detailed tank dispay with 24 position bar graph and tank status message (see lower graphic at left).
Autonomous tank monitoring.
Tank high/low audible and visual alerts.
If enabled, LPG level is displayed on Multi-Tank View.
Runs version 2.0 of the EZ-Profile algorithm which corrects displayed output for tank shape and sensor type.
|
Compatible with the following Senders:
Tek-Tanks Capacitive Senders
Tek-Tanks W2 Water and S2 Fuel US specification senders
0-90 Ohm LPG senders
Some VDO capacative type senders
All panel operating parameters can be set by the user through a series of easy to follow menus.
Overall panel dimensions: Width: 150mm ( 6.0")Height: 96mm (3.8") Depth: 35mm (1.25") |
Download the 8 Tank Digital System Installation and Instruction Manual (5.7Mb)
Download the Invasive Rod Sender Installation Guide (5.48Mb)
Download the Non-Invasive Self adhesive Sender Installation Guide (2.61Mb)
Solo E Single Tank Digital Measuring System
The Solo E has been designed for water and fuel tanks giving a red warning light when the tank is 20% full.
There are 5 green LED's showing Empty, 1/4, 1/2, 3/4 and Full.
Basic Features:
Runs the simplified EZ-Profile algorithm.
Monitors one tank.
Tank level displayed in quarters.
Optional autonomous tank monitoring.
Low level alarm.
Compatible with all of our capacitive sensors, most capacitive sensors manufactured by other companies and our W2 Water and S2 Fuel US specification senders
Push button empty/full calibration.
Overall panel dimensions: Width: 90mm (3.5") Height: 50mm (2") Depth: 20mm (0.75")
Download the Solo Digital System Installation and Instruction manual
Download the Invasive Rod Sender Installation Guide (5.48Mb)
Download the Non-Invasive Self adhesive Sender Installation Guide (2.61Mb)
Solo F Single Tank Digital Measuring System
The Solo F has been designed for waste tanks giving a red warning light when the tank is 80% full.
There are 5 green LED's showing Empty, 1/4, 1/2, 3/4 and Full.
Basic Features:
Runs the simplified EZ-Profile algorithm.
Monitors one tank.
Tank level displayed in quarters.
Optional autonomous tank monitoring.
High level alarm.
Compatible with our SHS Reed Switch Waste Senders, W2 Water US SpecificationPush button empty/full calibration.
Overall panel dimensions: Width: 90mm (3.5") Height: 50mm (2") Depth: 20mm (0.75")
Download the Solo Digital System Installation and Instruction manual
Download the Invasive Rod Sender Installation Guide (5.48Mb)
Download the Non-Invasive Self adhesive Sender Installation Guide (2.61Mb)
