C-Warm selection 4

4. How hot will the water be?
	INDIRECT COOLED ENGINE Engine cooling circuit - schematic Cooling water circulates through the coil in the C-Warm heater in parallel with the flow through the engine heat exchanger.
Check your engine manual for installation details, or ask your engine supplier. The instruction manual supplied with C-Warm explains how to adapt the engine cooling circuit to incorporate the storage heater.
The temperature of the stored water can approach that of the water in the engine cooling circuit: 80 deg C or higher. Thermostatic control may be used to limit the stored water temerature. The temperature of water available from hot taps should not exceed 65 deg C. The CW276 cylinder thermostat simply limits the stored water temperature. The CW272 blender valve adds water to hot, to achieve the desired temperature, and effectively increases the amount of hot water stored.	CW272 Blender Valve


C-Warm Index
		Refer to Page
1. Water Capacity		1, 13
2. Space Available		1
3. Vertical or Horizontal		1, 8, 9, 13, 14
4. Single or Twin Coil		2, 13
5. Standard or High Pressure		3, 13
6. Fixing the Heater in place		8, 9, 10
7. Connecting the Pipework		11
8. Electric immersion Heater		2, 7, 11, 16
9. Controlling stored water Temperature		4, 5, 15, 16
10. Dealing with thermal expansion		6
11. F.A.Q		12

Tek-Tanks Ltd
The Old Stables
West End Farm
Colthouse Lane
Upper Froyle
Hampshire
GU34 4JR
England

Tel: +44 (0) 1420 520830
Fax: +44 (0) 1420 520840

A Tek-Group Company