Standard > Series A Standard Tanks
Water, Waste, and Grey Water.
Download
our Series 'A' Rectangular Tanks Data Sheet
A range of rotationally moulded tanks suitable
for water and waste.
These tanks are being used by some of the leading British manufacturers.
Originally designed as marine tanks, they have been moulded
in virgin grade medium density polyethylene resin, which is
either natural or black in colour. Other colours are available
to special order. The resin has a long term UV package and is
suitable for use in or out of direct sunlight.
These tanks have been moulded to our specification,
with a wall thicknes of 10mm. This extra thickness will combat
any odour problems sometimes associated with cheaper thinner
walled tanks when used in waste holding tank applications.
For OEM's a custom moulding service is available
- try us, it is not as expensive as you might think.
 The
tanks are supplied to us "bare" which means we can
place fittings to customers requirements using our advanced
heat fusion technology.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
127-41-41 |
Nat |
1270 |
410 |
410 |
210 |
|
|
|
|
|
|
|
|
|
|
|
|
|
* 5mm Wall Thickness
Colour notes:
Nat = Natural (Semi transparent white)
Black = Solid Black
All tanks can be manufactured in almost any colour, with any
wall thickness
but there is a minimum order of 10 tanks. Please phone for more
details.
Series A Standard Tank Fittings
Hose Tails and Hatches.
A range of fittings that are fitted to the
Series A range of tanks by Tek-Tanks. Price includes the positioning,
hole cutting, welding of threaded boss and the fitting itself.
Also included in the price is a full pressure test to 3psi once
the tank has been completed. All you need to do is tell us where
you want them positioned.
Information we need from you:
Firstly, draw a simple 3D drawing of the tank
with the outside dimensions marked. (See sketch below)
Part No: 60-38-38
Important points:
-
It is important that you provide us with as much information
as possible so there is no question as to position, type
and direction of fittings.
-
If positions of fittings are critical then please dimension
from an end or side, otherwise we will just scale your sketch
as near as possible.
-
If it is not clear we will not proceed until we have contacted
you to confirm the positions or directions either by phone
or fax.
Fittings List
Inspection Hatches |
|
Henderson TCL 4 Black |
235mm outside diameter |
Henderson TCL 4 Clear |
235mm outside diameter |
Wema FLB |
160mm outside diameter |
|
|
Hose Tails |
|
2" Straight |
|
1 1/2" Straight |
|
1" Straight |
|
3/4" Straight |
|
1/2" Straight |
|
2" Elbow |
|
1 1/2" Elbow |
|
1" Elbow |
|
3/4" Elbow |
|
1/2" Elbow |
|
|
|
50mm Dip Pipe |
Suitable for Black and Grey tanks |
16mm Dip Pipe |
(12mm Bore) Suitable for water tanks |
|
|
To assist you, please download our Water
and Waste Tanks Fitting Guide which has been designed
to help you decide which type of fittings and accessories
you require on your tank
We can supply these tanks "bare"
for you to fit up yourself with skin fittings and hatches, easily
sourced from any good chandler.
|
