Standard Vehicle Tanks
Series A Tanks – Water, Waste and Diesel
| Manufactured from 10mm thick medium density polyethylene, these tanks provide a robust solution to all vehicle tank requirements whether for water, waste or diesel.Water tanks will be taste free and the thick wall section will combat any odour problems normally associated with thinner walled tanks. Diesel tanks will have less condensation problems compared with metal tanks.These tanks can be supplied as plain tanks with no fittings. Tek-Tanks can however, “fit up” these tanks to your requirements. You tell us what fittings you want and where you want them.Download Series A Rectangular Tank Brochure Download Series A Shaped Tank Brochure Download Tek-Tanks Standard Fittings Guide Our Download section contains all the Series A tank drawings that can be downloaded in pdf format. Fittings can then be marked up on the drawing and sent back to us for quotation. The large baffled tanks range from 250 to 1000 litres and are ideally suited for car valeting and window cleaning vehicles.
|
 |
Series C Tanks – Diesel & Petrol |
|
CE marked fuel tanks suitable for petrol and diesel. Manufactured, in Italy, from High Density Polyethylene. These tanks are red in colour and come complete with inspection cover, filler cap with vent and an 8mm fitting with pickup pipe for fuel feed. A fuel return may also be fitted. There is also provision to fit a sender unit (S2-20 to S2-40) suitable for use with gauge IPFR (See Senders and Gauges).Suitable for use on the Inland Waterways. Buy Series C Fuel Tanks OnlineBuy Series C Tank Fittings and Accessories Online |
 |
Series C Tanks – Water |
|
| Series C Water Tanks are available in 2 versions:1. Series C Supreme.Manufactured, in Italy, from High Density Polyethylene, these tanks are white in colour and come complete with inspection cover, filler cap with vent and a 1/2″ water connection fitting and pickup pipe. There is provision to fit a sender unit W2-30 or W2-40 suitable for use with gauge IPWR. (See Senders and Gauges)Buy Series C Supreme Tanks Online |
 |
| 2. Series C Value.Manufactured, in Italy, these are green rigid plastic tanks with threaded inspection porthole, with strengthening ribs above and below tank. These tanks are supplied without fittings which can be ordered separately if required.Buy Series C Value Tanks Online Buy Series C Fittings and Accessories Online |
 |
Series C Tanks WasteAn excellent range of sensibly priced waste holding tanks manufactured in Italy. Moulded with a thicker wall than the equivilent green water tanks in the Series C range to combat odour problems normally associated with moulded tanks. Fitting sizes are 1 1/2″ Inlet, 1 1/2″ Pumpout and 1″ Vent all mounted on an inspection plate which is removable. Fittings can be supplied with either elbows or straights. (Specify when ordering)
|
 Series C Waste Tank with Elbow Fittings
 Series C Waste Tank with Straight Fittings |
