£18.95 – £28.69
A range of straight plastic hosetails for use with Series A and Custom Water, Waste and Grey Water Tanks.
Description
A range of straight plastic hosetails for use with Series A and custom built Water, Waste and Grey Water Tanks.
The hosetails are screwed onto male threaded HDPE socket by means of a separate female nut. The socket is welded to the tank by Tek Tanks using an advanced fusion welding process. The hosetail is sealed with a ribbed rubber washer that contacts the underside of the hosetail and the top of the machined socket face. These fittings need only to be done up hand tight.
The price includes marking out, drilling the hole, welding the threaded socket and the pressure testing of the whole fitted assembly.
The threaded socket is not removable once welded to the tank and stands 24mm above the tank top. Please allow for this measurement when considering how to get the tank in and out of position.
Dip pipes for drawing off the contents with a pump can be fitted to any of these assemblies. Please see the Dip Pipe products for more information on lengths and available diameters and materials.
Height above tank top:
S13P = 64mm
S16P = 64mm
S19P = 68mm
S25P = 74mm
S38P = 92mm
S50P = 100mm
Replacement Sealing Washers can be found here.
Additional information
| Weight | N/A |
|---|---|
| Size | 13mm (1/2"), 16mm (5/8"), 19mm (3/4"), 25mm (1"), 38mm (1 1/2"), 50mm (2") |
You must be logged in to post a review.
Reviews
There are no reviews yet.