125 Litre 1100-460-290 (LWH)

Volume [litres] :              125
Dimensions [mm]:         Length: 1100; Width: 460; Height: 290.

Suitability:                         Fresh Water, Grey Water, Black Water, Diesel, not suitable for Petrol
Material:                            Medium Density Polyethylene (MDPE)
Wall thickness [mm]:    10
Colour:                               Natural; (Black available at extra cost, subject to a lead time)
Lead time:                         10 working days (with Tek Tank fittings*), 1-2 working days (without fittings) Subject to availability.
Orientation:                      Can be orientated in any position
Warranty:                          5 years

* Please click here to choose from extensive range of Tek Tank fittings suitable for this tank. For all Series A tank fabrications please allow a lead time of 10 working days.
To see all of the fittings at a glance, please download the Fittings Guide from the product documents box above. If the fitting you require is not shown, then please give us a call to discuss your requirements.

The hole shown in the tank is part of the moulding process and would either be blanked off by Tek Tanks or, alternatively, you could position an inspection hatch or fitting in the same position.

Black & Grey Waste
The tanks 10mm wall thickness ensures that holding waste odours are contained within the tank, not so with thinner walled cheaper tanks.

Water
Tek Tanks quality food grade plastic ensures that you will never experience any plastic taste to the water.

Diesel Fuel
The thermal properties of a Tek Tank almost eradicates the build-up of condensation limiting the possibility of water in the fuel.

Notes:
These tanks are not suitable as the main supply to a vehicles engine in automotive applications. These tanks must be positioned outside of an engine compartment of a boat and away from other heat sources. The tanks should be situated in a well ventilated area.