- Connections: for 13mm (½”) bore hose or Hep20 push-fit connectors CW193
- Dimensions: 230mm long, 152mm wide, 110mm high
- Fuse Size: 10(amp)
- Maximum Current: 12 volt – 4.4(amps)
- Output: 11 litres/minute (2.4 gallons/minute) open flow
- Pressure Switch: – cuts in at 1.0bar (15psi) – cuts out at 1.7bar (25psi)
- Efficient, high-flow, self-priming pump serving 2 or more outlets
- Multi-diaphragm design self primes to 1.8m vertical lift, can run dry without damage
- Supplied with snap-in ports for hose or Hep20 connectors
- Quiet running
- Motor protected by automatic thermal overload cut-out
- Includes bypass feature to provide smooth, quiet flow. No need for accumulator tank
12 Volt Par Max 2.9 Diaphragm Pump
Par Max 2.9 pressure controlled pump.
This pump was supplied incorrectly to a customer and had been used very briefly. It is unmarked and has the full length of wires.
All connections are in a sealed bag. There is no original box. This pump is still covered under full warranty for 12 months from date of purchase.
Out of stock