Plastic Blanking Caps
£25.07 – £38.10 Inc VAT
A range of plastic Blanking Caps for use with Series A and Custom Water, Waste and Grey Water Tanks.
This fitting is not suitable for a retro fit, please contact the office if it is just the cap required.
A range of Blanking Caps for use with Series A and custom built Water, Waste and Grey Water Tanks.
The plastic caps are screwed onto male threaded HDPE socket. The socket is welded to the tank by Tek Tanks using an advanced fusion welding process. The cap is sealed with a ribbed rubber washer that contacts the underside of the cap and the top of the machined socket face. These fittings need only to be done up hand tight.
The price includes marking out, drilling the hole, welding the threaded socket and the pressure testing of the whole fitted assembly.
The threaded socket is not removable once welded to the tank and stands 24mm above the tank top. Please allow for this measurement when considering how to get the tank in and out of position.
Height above tank top:
C19P = 28mm
C25P = 30mm
C38P = 35mm
C50P = 55mm
| Weight | N/A |
|---|---|
| Size | 19mm (3/4"), 25mm (1"), 38mm (1 1/2"), 50mm (2") |
Related products
Series A Plastic Rectangular Tanks
Grey Water Systems
Series A Plastic Rectangular Tanks
Series A Plastic Rectangular Tanks
