£6.36 – £11.64
Plastic Dip Pipes in various lengths and diameters suitable for Tek Tanks Plastic Hosetail Assemblies.
A range of Dip Pipes for use with Series A and custom built Water, Waste a Grey Water Tanks.
A dip pipe is fitted by Tek Tanks to the underside of the Straight and Elbow plastic hosetail assemblies allowing the contents of the tank to pumped out from the top of the tank. It is good practice to place as many fittings on the top of the tank as possible.
Dip pipes are priced by length and diameter. Choose the length required. Let’s say your tank is 510mm tall, then you will require a dip pipe 600mm long. Please check the table below to establish which diameter you will require.
Tek Tanks cut the pipe to required length when manufacturing your tank.
20mm diameter plastic dip pipe is for 13mm, 16mm and 19mm hosetail assemblies and 15 and 22mm Push Fit Connectors.
25mm diameter plastic dip pipe is for 25mm hosetail assemblies and the 28mm Push Fit Connectors.
50mm diameter plastic dip pipe is for 38mm and 50mm hosetail assemblies and the E38PR.
20mm, 25mm, 50mm
0 – 300mm, 301 – 600mm, 601 – 900mm, 901 – 1200mm