The 3281 Water Level Sender will measure the water level in the fresh water tanks. They provide a ±2% accurate tank level to the NMEA2000® marine network.
The 3281 can be programmed with up to 100 volumetric points so that it offers the most accurate indication of the VOLUME of water in the tank. This volume information can then be displayed on any NMEA2000® enabled display wherever it is required.
It is robustly constructed in stainless steel with no moving parts to stick or fail in service. It is available to suit tank depths from 250mm to 2 metres.
Up to 16 senders can be connected to a single network and the tank number is simply selectable at installation by means of the small rotary switch.
It is certified to the NMEA2000® network standard and attaches to the network using a single “Micro” plug. It draws less than 50mA from the network.
- High ±2% Accuracy
- No moving parts to stick or fail
- Tank Depths from 250mm to 2Mtr
- Up to 16 of each type of sender on a single network
- Low Top Profile and Easy to Install
- Robust Stainless Steel Construction
- NMEA2000® Certified
1 1/4″ BSP male thread.
Tek Tanks recommend that the sender is made shorter than the full depth of the tank. This will allow a reserve capacity to be retained when the gauge/display is showing empty.